Inverted connection
Check the polarity of the cable and the power supply, connect them correctly.
Lack of power
Connect the product to a higher power source (W).
Inadequate voltage
Connect the product to the power supply indicated on the panel or cable label.
Excessive buckling
Fix or change the LED illuminator.
Forced power cable
Fix or change the LED illuminator.
Excess cable
Reduce the length of the cable to the power supply.
Inadequate voltage
Connect the product to the appropriate power source as indicated on the panel or cable label.
Excessive bucklingo
Fix or change LED illuminator
One side of the panel has not been connected
Connect all cables that come from the panel to the power supply.
The panel has the transparent protector
Remove the transparent protector from the panel.
The panel has been vinyled directly
Use a vinyl holder, do not directly vinyl the panel.
Not enough separation between graphic and panel
Separate the graphics further from the panel.
Inappropriate diffuser
Increase the separation between the panel and the support or replace the support with a thicker one.